Back in 2019 I picked up a burned F10 535i M Sport, 2016, from copart for $2,100. Used market at the time was around 30 grand. The interior was torched and the wiring melted, but the body and engine were clean. So basically I bought a live car that needed everything inside redone + body work.

Brought it home, parked it in the backyard, and didn't go near it for 6 months. Don't know why. Either waiting to want it, or waiting to stop being afraid of what I'd gotten into. At some point I sat down and started.

Replaced the interior, redid the wiring, straightened the body. Got to paint and that's where the interesting math began.

I've always liked Porsche grey, that quiet, slightly warm one. I want that. Call a paint shop, explain what I'm after. They quote me $5-10K. They say it calmly, like that's a normal price to paint a car I bought for 2.1.

Not happening.

Drive to Harbor Freight. 40-gallon compressor for $240 and a spray gun for $400 (don't cheap out on the gun, any savings there come back as runs and orange peel). Speedokote: white $90, black $90, clear $72. Masking tape $6, plastic $12. Under $1K total. Versus $5-10K at the shop.

3.5 gallons of paint once it's thinned, paint till you drop. Could thin more if needed. Smart move would've been to mix it all at once, but no, I mixed in batches, and, wouldn't you know it, ran short on one door. Had to mix a new batch. Came out half a shade darker. That door still sits darker than the rest of the car. So I never approach the Bimmer from the passenger side anymore. If anyone's doing this by hand, folks, mix all the paint at once, with extra to spare. Don't repeat my mistake.

Saturday I pull the moldings and mask. Sunday I paint.

From 20 feet it looks good. From 2, you can see it's a first-time job. That's fine, I made peace with that going in.

Then cosmetics and performance. I order custom 21-inch wheels. Custom takes forever because they build them to spec. They call and say another month. A week in I cave and order stock off the catalog in parallel. Big ones. Y-spokes.

Quick aside.

Y-spokes aren't just a wheel pattern. They're an open mechanism, conceptually close to a skeleton watch, you see everything inside, and that's the whole point. You see the rotor, the caliper, the brackets, how they sit, how the clearances work. It only works if the internals are worthy. If the rotor is small and floats in that big window like a lonely coin on a plate, it's not design anymore, it's a silly chariot. You opened it up, now fill it to the edge.

Which means stock brakes in Y-spokes are an immediate no. So bigger rotors.

Carbon? Thought about it. Carbon is for the track, doesn't work on the street. They run cold and you'll never get them up to temp in city driving. Jay Leno told a story about going to McLaren wanting carbon ceramics and they talked him out of it, said it'd be worse than stock on the road. If Jay Leno didn't go for it, I sure don't need to. I'm not Jay Leno and I'm not tracking the car.

So drilled rotors. Old, solid, proven, exactly what's needed.

Couple of months and several iterations. Measure, doesn't fit, redo, measure again, something else is off, redo. Eventually it sits right.

The Y-spokes fill in. The window closes. The coin becomes a plate.

And here's the funny part. The car when it's all together is a serious chick magnet. Not a bro situation at all, the guys walk right past. Maybe because the F10 is kind of their car to begin with, plenty of women driving them out there. I don't know how it works, just stating the fact.

I sit and look at the car. Think, what's the actual point of doing it this way.

The math is simple. You buy a car for 30 grand on a loan, spend 6 years paying it off, drive it stock the whole time because there's no money left for mods. Or you buy a copart at 5-30% of stock price. You fix it if you know what you're doing or you're willing to learn. The difference goes into mods.

That's the cheat code. Pretty much the idea behind ModsNation.

But there's a con. A car like this is hard to sell. If you buy one, it's probably forever, with rare exceptions. In 2020 someone offered me $50K for this Bimmer. I didn't sell.